|
|
 Thank you for your interest in my work. Each and every ring is custom made for an individual client. This form provides us with information so we may work with you to design your ring. If you have any ideas that you would like to discuss please include them in the comments section or you can skip this form entirely and just send an E-mail or call 877-408-7287.
By filling in this form you will receive a price quote for the ring(s) you specify. You can use the drop down menu or just put in the code for the ring you are interested in. There is more general information about the rings on the Frequently Asked Questions page (FAQ). Information about placing an order can be found on the Purchasing page. If you are interested in other design styles, have other types of questions or are having problems with the quote form please E-mail us at tbin@mokume-gane.com or call us at 877-408-7287.
Information privacy is important to us. We only use the information you give us to provide you with a quote at this time. If you decide to place an order, we use this informaion to fill your order. For full details on our privacy policy go to our privacy statement.
Thanks again,
Jim and Terry
|
Your Name :
Your E-mail Address :
|
Please double check your E-mail address.
If it is not correct we cannot send you a quote! |
|
The first thing you need to decide is what combination of metals you want for your ring. Our standard combinations are listed in the pull down menu below. However we do make special combinations; if you do not see a combination you want please ask about it in the comments box below.
Ring 1 Material
|
|
Ring size and width are a factor in the cost of the ring. If you know your ring size then type it in below. If not leave it blank and we will provide a general quote. If you decide to place an order with us we will send out finger gauges to determine your correct ring size for the best fit
.
Ring 1 Size
Width*
Profile
* Three-quarter Round rings are only available in 3.5 mm width
|
Ring Profiles
|
Surface Texture
Etched rings must contain sterling silver. |
Etching is done by by dipping the ring in an chemical that dissolves only the sterling silver. By leaving it in the chemical for a short period of time a small amount of the silver is removed. This creates a lower area where the silver was and provides a surface texture that enhances the pattern of the ring . |
| Option 1: Rails
Rails are bands or trim that are applied to the sides of the ring. They can be either round or "square" and can be made in any of the available metals.
Rail Shape
Rail Metal
Rails cannot be put on rings that are less than 5mm wide
|
 |
Option 2: Liner
Liners are a inner band of metal that is fabricated to fit and then attached inside the ring. A liner can be made from any metal listed in the menu below. If you ring has rails the liner can be of a matching metal or a different metal. The liner does not change the ring size
Liner Material |
 |
| Ring 1 Comments or Questions: |
|
|
|
The first thing you need to decide is what combination of metals you want for your ring. Our standard combinations are listed in the pull down menu below. However we do make special combinations; if you do not see a combination you want please ask about it in the comments box below.
Ring 2 Material
|
|
Ring size and width are a factor in the cost of the ring. If you know your ring size then type it in below. If not leave it blank and we will provide a general quote. If you decide to place an order with us we will send out finger gauges to determine your correct ring size for the best fit.
Ring 2 Size
Ring 2 Width*
Ring 2 Profile
* Three-quarter Round rings are only available in 3.5 mm width |
|
Surface Texture
Etched rings must contain sterling silver. |
Etching is done by by dipping the ring in an chemical that dissolves only the sterling silver. By leaving it in the chemical for a short period of time a small amount of the silver is removed. This creates a lower area where the silver was and provides a surface texture that enhances the pattern of the ring |
Option 1: Rails
Rails are bands or trim that are applied to the sides of the ring. They can be either round or "square" and can be made in any of the available metals.
Ring 2
Rails Shape
Rails Material
Rails cannot be put on rings that are less than 5mm wide
|
|
Option 2: Liner
Liners are a inner band of metal that is fabricated to fit and then attached inside the ring. A liner can be made from any metal listed in the menu below. If you ring has rails the liner can be of a matching metal or a different metal. The liner does not change the ring size
Ring 2 Liner Material |
|
Ring 2 Comments or Questions:
|
|
|
   |
